2024 Sure-Trac 7x20' Tube Top ATV Side Ramps Utility Landscape Trailer 7000# GVW

The Tube Top ATV model utility is a very functional commercial grade utility landscape grade. It's a nice looking trailer that is well engineered. The trailer is built on the popular tube top chassis, and then receives a pair of side mount 5' punch plate ramps. The ramps look good and tend to work better than a 4' side gate. Due to the side ramps, both the single and tandem axle models come standard with a full wrap tongue for increased stability. This trailer would be ideal for many ATV/UTV applications, as well as anyone who could benefit from side loading construction materials to lighter pallet material or similar. We have other make/models of utilities in stock, but if you're looking for our best mix of features, craftsmanship (powder coat/wiring/weld quality), and ATV ramp sides, this trailer should receive a closer look.

Full wrap tongue (Most don't provide enough strength under the ramps and the trailer flex's excessively. Our trailers all have a full wrap tongue for proper support).

Punch plate ramps (Lighter, better traction, good looks, safer for pneumatic wheeled tires, knife edge for easy loading)

Watch a video walk around of this model trailer here: https://youtu.be/TJgP3BDS02o

FEATURES

• Fold Flat/Spring Assist Gate
• Rubber Mounted LED Sealed Lights
• Powder Coat Finish
• 2 x 6 Pressure Treated Decking
• All Steel Fenders with Backers
• 15" Radial Tires (205 75R15 LRC) 3.5K Axles
• EZ Lube Hubs
• 2k Zinc Plated, Set Back Jack
• Safety Chain Holders
• Tube Uprights
• Spare Tire Mount
• 2x2 Heavy Tube
• Self-Retained Gate Pins
• Board Retainers Front and Rear
• 5' Fabricated Steel Ramps
• Bead Blasted, Iron Phosphate Wash Steel Prep
• Wiring Enclosed in Tubular Steel
• Gel Filled Electrical Connectors

• Fold Flat Ramp Gate (Gate folds flat down inside trailer bed to reduce wind resistance and improve ride quality. Many gates are not designed with this feature).
• Spring assist ramp gate (Although a very heavy duty gate, the gate is perfectly balanced and has virtually no weight to it. By folding it inside the trailer, you remove the tension and allow the gate to be easily removed. )
• Self retained gate pins (While the gate pin system seems seemingly unimportant, you can't appreciate this until you've had a poorly designed pin setup. Nothing to lose, nothing to break. Simple yet secure).
• Zinc set back jack (More corrosion resistant than most, and also in a set back position to reduce the chance of impact with your tail gate. Many still use a standard painted A-frame jack that is in the way).
• Sealed LED lights (Brighter, longer lasting, and they have less draw. Now with the new bullet style. Some competitors are still using stud mount incandescent lights)
• Protected wiring (Unlike many trailers that literally either have the wiring stapled to the underside of the bed, or ran through a torched hole, the wiring is ran in conduit and gel filled)
• Easy lube hubs (This standard feature makes servicing your bearings a breeze for any homeowner armed with a grease gun and a few hand tools)
• 15" Radial Tires (Longer lasting and better riding, radial tires should be on all trailers, but sadly many still use bias...beware of the "hybrid" tire, which looks like a radial, but is still a bias tire at heart).
• Self adjusting brakes (We equip all of our tandem axles with brakes on both axles. The brakes are self or forward adjusting, much like a vehicle, and automatically adjust to the proper clearance via spring tension).
• Front and rear board retainers (While the original owner isn't likely to be the one to replace the deck boards, Sure Trac makes it a breeze to do so. While many simply weld the front/rear in place, Sure Trac uses a "retainer" that, by simply removing a handful of decking screws, allows the boards to easily and very simply be removed/replaced)
• Spare tire mount (While many don't include a mount or have an uninspiring design, Sure Trac's does an excellent job integrating the mount into the structure without obstruction).
• Tube gate crossmembers (The gate on all utilities are built from 2x2" tube cross members. Unlike many trailers that use angle, the gate isn't a bottleneck on this trailer. For the most part, if it's within the legal payload of the trailer, the gate will handle it with ease).
• Tread plate teardrop fenders (Most are equipped with smooth fenders, which are lighter duty and just don't look quite as robust. On tandems, the teardrop style also gives more strength than the cheaper straight fender of found on cheaper models)
• Gussets on fenders (All trailers 6'+ get fender gussets, which gives additional strength to a fender impact, and protection to the light and wiring. Also functional as a side step up into the trailer!)
• Triple tube tongue (Much more support and stability than the inferior trailers offering only a single tube or an A-frame tongue. If you ever load tongue heavy, this is the trailer for you).
• Channel full wrap tongue (All tongue's are made from structural channel, and all tandem's and ATV ramp models have a full wrap tongue. Many cheaper utilities don't offer a full wrap, which offers little support between the front of fender to the front of the trailer. Also, some use a lighter angle iron tongue or a non-structural formed tongue).
• Siliconed joints (Sure Trac protects the various seams of the trailer from the elements, such as between the tongue and mainframe, fender and toprail, etc).
• EZ Gate Removal (The gate is heavy duty, but due to an excellent design, it can be removed fairly quickly, by one person, and requires no tools. Many gates require a second person to remove, as well as a socket).
• Tie downs (Many utilities don't include standard tie-downs, but with Sure Trac most models include either stake pockets or D-rings, and there is also the bottom of the tube uprights).
• Powdercoat Tough (Our trailers have one of the toughest finishes on the market, in large part due to the steel prep prior to final finish. One of the best finishes on the market, particularly at the price point.
• Painted Underside (Hard to believe, but if you've crawled under many utilities, you'll quickly find that paint on the underside of some trailers is an option...makes you wonder where else shortcuts are being made).
• Stronger Top Rail (With tube top rails, uprights, and mitered corners, our utilities have one of the toughest top rails, and looks robust). Better Paint, Better Wiring, Better Welds, Better Features, Better Design...Better get one, because all utility trailers are not created equal.